Sinovo telecom announced new products 400G QSFP-DD SR8 AOC, 400G OSFP SR8 AOC and 100G QSFP56 DR optical modules.

Its application of PAM signal transmission technology, PAM4 is a data modulation mode, is used by the IEEE in each channel 50Gb / s Ethernet communication standards, is expected to become the core and cornerstone of the future 50GE, 200GE and 400GE interconnection. 200G QSFP-DD SR8 AOC and 200GOSFP SR8 AOC.

 Its AOC product competitiveness comes from high-throughput automation, efficient low-cost production processes and COB assembly technology at rates up to 50 Gb/s per channel. The 100G & 25G series products that have been used in data centers and 5G forward transmissions 

sinovo telecom have been ready for mass production: - 25G SFP28 SR/LR Optical Module & AOC (Active Cable) - 100G QSFP28 SR4/PSM4/CWDM4 Optical Module & AOC (active cable) The Sinovo telecom Theofc exhibition, active optical cable products include 10G SFP+ AOC, 25G SFP28 AOC, 28G SFP28 AOC, 40G QSFP+ AOC, 56G QSFP+ AOC, 100G QSFP28 AOC, 120G CXP AOC, 200G-SR4 QSFP DD AOC active optical cable. In addition to high-speed optical interconnect products, sinovo telecom also provides industry-leading 400G QSFP-DD/OSFP high-speed copper cables, connectors and next-generation PCIe interconnect solutions.

Sinovo telecom Theofc exhibition, active optical cable products include 10G SFP+ AOC, 25G SFP28 AOC, 28G SFP28 AOC, 40G QSFP+ AOC, 56G QSFP+ AOC, 100G QSFP28 AOC, 120G CXP AOC, 200G-SR4 QSFP DD AOC active optical cable.

 In addition to high-speed optical interconnect products, sinovo telecom also provides industry-leading 400G QSFP-DD/OSFP high-speed copper cables, connectors and next-generation PCIe interconnect solutions. The 200G AOC active cable is an eight-channel, pluggable, parallel, fiber QSFP dual density for 2x100G Ethernet applications. This optical module is a high-performance module for short-range multi-channel data communications and interconnect applications. It integrates 8 data channels in each direction with 8x25.78125 Gbps of bandwidth. Each channel can use OM3 fiber to transmit 70m or OM4 fiber to transmit 100m. These modules are designed to use a multimode fiber system with a nominal wavelength of 850 nm. The electrical interface uses 76 contact edge type connectors. The optical interface uses a 24-fiber MTP (MPO) connector. The module integrates easy-flying technology-proven circuits and VCSEL technology to provide reliable, long-life, high-performance, and consistent services.

200G AOC active optical cable composition We know that active fiber optic cable is an integrated optoelectronic device that is used in high-speed, high-reliability interconnected transmission equipment between data centers, high-performance computers, and mass storage devices. It usually meets industry-standard electrical interfaces. The internal electro-optical-electrical conversion uses the superiority of fiber optic cable for data transmission. 200G AOC active optical cable structure In simple terms, AOC active optical cable can be understood as a system consisting of two optical transceivers and cable jumpers. Formula: Active Optical Cable = Two Optical Transceivers + Fiber Cable Jumper    

 The 200G AOC optical transceivers on both ends have a data transfer rate of 200 Gb/s, and it is an eight-channel, pluggable, parallel, fiber QSFP dual density for 2x100G Ethernet applications. This optical module is a high-performance module for short-range multi-channel data communications and interconnect applications. It integrates 8 data channels in each direction with 8x25.78125 Gbps of bandwidth. Each channel can use OM3 fiber to transmit 70m or OM4 fiber to transmit 100m.

The 200G AOC optical transceivers on both ends have a data transfer rate of 200 Gb/s, and it is an eight-channel, pluggable, parallel, fiber QSFP dual density for 2x100G Ethernet applications. This optical module is a high-performance module for short-range multi-channel data communications and interconnect applications. It integrates 8 data channels in each direction with 8x25.78125 Gbps of bandwidth. Each channel can use OM3 fiber to transmit 70m or OM4 fiber to transmit 100m. These modules are designed to use a multimode fiber system with a nominal wavelength of 850 nm. 200G AOC Active Optical Cable Working Principle In fact, AOC's working principle is not much difference. The electrical signal is input through the A terminal, and the electrical signal is converted into an optical signal of a specific wavelength through the electro-optical conversion device. The optical signal is modulated and coupled and then input into the transmission cable; after the optical signal reaches the B terminal, the optical detection device transmits the optical signal. After detection, it is amplified, processed and converted to output the corresponding electrical signal. Passive optical cables have gradually replaced cables in a wide range of transport networks, and active optical cables are further improvements to passive optical cables. It will play an increasingly important role in the end-to-end information interconnection.

Active Optical Cables (AOC) combines the technology of optical module and fiber optical cable. It has been used widely for both telecommunication and data communications. The deployed equipment includes servers, storages, switches, routers, computing equipment, and, etc.

AOC supports the parallel transmission, including 40G, 100G and beyond Ethernet, 56G, 100G and 200G Infiniband and 128G, 256G Fiber Channel application, also supports 40G QSFP to 4x 10G SFP+ Parallel Fan-Out transmission application, 100G QSFP28 to 4x 25G SFP+ Parallel Fan-Out transmission application. AOC is also be used in multi-channels serial transmission network.

AOC accelerates storage, data, and high-performance computing’s optical fiber connectivity.

The passive optical interconnect products (round & ribbon) could deploy in QSFP AOC, QSFP28 AOC, CXP AOC, CFP AOC, CPAK AOC and new types of mode, QSFP-DD AOC, Micro-QSFP AOC, CDFP AOC products, and, etc.

Applications

Passive optical interconnect jumpers could be deployed in QSFP AOC, QSFP28 AOC, QSFP-DD AOC, Micro QSFP AOC, CXP AOC, CFP AOC, CDFP AOC, and any parallel optical transceiver module AOC, supporting network types include Ethernet with optical fiber transmission, Infiniband with optical fiber transmission, and Fiber Channel.

Features

GR-1435, GR-1221 compliant

Transmission mode: multi-channel serial and parallel transmission mode

High accuracy,

Support：12 x 1.25~3.5G, 2X40G(4x10G), 2X100G(4x25G), 10X10G, 12x10G, 4x32G